Planet Eclipse Etek 3 AM Jungle Camo Paintball Marker
Product Description
The AM is intrinsically identical to the LT, but has an All Metal construction. The Frame, Eye Covers and Feedtube are all high-grade aluminium, just as you will find on the rest of the marker. All other components of the marker, such as bolt, rammer, barrel and circuit board are all the same and are 100% interchangeable between the LT and the AM.
Weight – 1000g/2.20lb Including 14” Etek3 Barrel, Battery, Feed Tube, OOPS Length – 537mm Including 14” Etek3 Barrel Height – 227mm Width – 28.5mm
Features:
LED Board - 3 tru-colour LED indicators simplify the programming process. Soft Grips - Follows the same design as the Geo and Ego grips. Comfortable, slim, grippy and soft. Programmable Firing Modes - as standard the Etek3 has the capability to be set to cover every current tourney regulation. On/Off Purge System(OOPS) - Uses the sames OOPS as the Ego10. It dumps air from the marker when it's turned off. Break Beam Sensor System - Ensures that the marker is preventing chopped balls in the breech. Fully Adjustable Trigger - The trigger rides in a self-lubricating trigger holder that clips neatly into the frame. 14 inch 2-Piece Barrel - Honed barrel with the distinct Eclipse Reverse Threading using the same interface as the Shaft2, Shaft3 and SL barrels. 0.693" rear bore is standard. S3 Inline Regulator - Taken directly from the Ego10, the S3 regulator features a self-purging device to ensure that the valve chamber is left empty once the tank has been removed. New Direct Mounted Solenoid - Mounts directly to the marker body, directly adjacent to the rammer. Cure Bolt - carried over from the Ego range, the Etek3 now has a Cure Bolt as standard, as well as a body contoured cut at the rear so the bolt blends seemlessly into the marker. Zick Kit - The Zick kit that became famous in the SL74 and carried through all Ego08/09 production, can be found standard in the Etek3. New Smaller Rammer Housing - this makes the whole rear bottom tube smaller and allows the gun to be more compact. Deftek Offset Feed - the feed is offset to one side by a small amount One-Piece Body (No FRM) - Like the Ego7 onward, the FRM of the Etek3 is integrated into the body for reliability and robustness. Adjustable LPR - With the same LPR found on the SL8r Ego, the Etek3 offers precise control of LPR pressure.
Weight – 1000g/2.20lb Including 14” Etek3 Barrel, Battery, Feed Tube, OOPS Length – 537mm Including 14” Etek3 Barrel Height – 227mm Width – 28.5mm
Features:
LED Board - 3 tru-colour LED indicators simplify the programming process. Soft Grips - Follows the same design as the Geo and Ego grips. Comfortable, slim, grippy and soft. Programmable Firing Modes - as standard the Etek3 has the capability to be set to cover every current tourney regulation. On/Off Purge System(OOPS) - Uses the sames OOPS as the Ego10. It dumps air from the marker when it's turned off. Break Beam Sensor System - Ensures that the marker is preventing chopped balls in the breech. Fully Adjustable Trigger - The trigger rides in a self-lubricating trigger holder that clips neatly into the frame. 14 inch 2-Piece Barrel - Honed barrel with the distinct Eclipse Reverse Threading using the same interface as the Shaft2, Shaft3 and SL barrels. 0.693" rear bore is standard. S3 Inline Regulator - Taken directly from the Ego10, the S3 regulator features a self-purging device to ensure that the valve chamber is left empty once the tank has been removed. New Direct Mounted Solenoid - Mounts directly to the marker body, directly adjacent to the rammer. Cure Bolt - carried over from the Ego range, the Etek3 now has a Cure Bolt as standard, as well as a body contoured cut at the rear so the bolt blends seemlessly into the marker. Zick Kit - The Zick kit that became famous in the SL74 and carried through all Ego08/09 production, can be found standard in the Etek3. New Smaller Rammer Housing - this makes the whole rear bottom tube smaller and allows the gun to be more compact. Deftek Offset Feed - the feed is offset to one side by a small amount One-Piece Body (No FRM) - Like the Ego7 onward, the FRM of the Etek3 is integrated into the body for reliability and robustness. Adjustable LPR - With the same LPR found on the SL8r Ego, the Etek3 offers precise control of LPR pressure.
